Correct Use Of Laser Metal Cutting Machine

laser metal cutting machine adopting imported guiding mechanism and servo motor, has high precision. Air can be used to cut various metal sheet.

With advance technology and rich experience, our IGOLDENCNC laser cutter metal for metal can be leader

Correctly Starting !!!  laser metal cutting machine

In the process of using the stainless steel fiber cutter machine,

Correctly switching on the metal laser machine

Not only can increase the life of the laser metal cutting machine,

And it also allows us to avoid a lot of unnecessary trouble

(such as damage to the body, causing a short circuit,It even caused the machine parts to burn out, etc.).

So,it is also important to switch the laser metal cutting machine correctly.

When starting the metal laser machine It should be started following below procedure:

1). Turn on the mechanical main power.

2). Turn on the water chiller power supply, the air compressor and the dryer power switch.

3). Turn on the machine lath power.

4). Turn on the fiber laser source  power.

5). Turn on the high voltage start switch.

6). Turn on the laser start switch of fiber laser source.

7). Turn on the electronic shutter switch.

8). Clockwise direction turning the Power Adjustment knob to the appropriate value.

9). Turn on the fiber laser cutting auxiliary gas O2, N2, air.

Advantage of laser metal cutting machine:

High cutting precision. Positioning accuracy of the laser metal cutting machine can reach ±0.05 mm. And the repeat positioning accuracy can reach ±0.03 mm.

Narrow slit. The laser beam is focused into a very small point to achieve a high power density at the focal point. The slit width is generally 0.10-0.20 mm.

The cutting surface is smooth. The cutting surface has no burrs, and the surface roughness of the cut is generally within Ra6.5.

Fast speed. The metal laser cutting machine speed can be up to 10 m/min. And its maximum positioning speed up to 30 m/min.

No damage to the work. The laser cutting head will not contact the surface of the material to ensure that the work piece is not scratched.

Save materials. The fiber laser cutter use CYPCUT computer programming. And it can realize to maximize material utilization.

Safety and environmental protection. The cutting processing has less waste, clean, safe and pollution-free.

Compared with the traditional laser machine, it has the advantages of no adjustment, no maintenance, high stability, etc., which reduces the cost of accessories and maintenance time.

Abundant types of processing materials. It can process carbon steel, stainless steel, aluminum, aluminum alloy, copper, etc. In addition, it can process materials with high hardness, high brittleness and high melting point.

High level of automation. The laser cutter adopts fully enclosed processing. I t has the features of no pollution, low noise. All these can greatly improve the task of the operator.

laser metal cutting machine Applicable materials:

stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, gavanized steel, nickel titanium alloy, nikeel chromium

alloy, titanium alloy and other metal materials.

Features of cutting machine metal 

1.Raytools laser cutting head ,Germany brand Precitec laser cutting head as optional 

2.Japan Yaskawa servo motor and drivers 

3.Germany Atlanta Gear and Rack 

4.French Motoreducer ,Germany Neugart Reducer as optional 

5.Raycus Laser source or Raycus laser source